Datalogic DX6400 Installationshandbuch PDF herunterladen (Seite 39)

INSTALLATION

The following is an example of a connection to a LAN through a Hub using a straight through

cable:

DX6400

HUB / SWITCH

RX+

TX-

TX+

RX-

n. c.

n. c. = not connected

Figure 33 – Straight Through Cable

The following is an example of direct connection to a PC using an inverted cable:

DX6400

HOST PC

RX+

TX-

TX+

RX-

n. c.

n. c. = not connected

Figure 34 – Inverted Cable

For further details refer to the “Ethernet Service Guide” document provided as reference

documentation.

2.3.4 Power Supply

The supply voltage for correct operation of the scanner must be between 15 and 30 VDC.

The max. power consumption is 24 W including startup current.

Datalogic strongly recommends a minimum 24 VDC supply voltage when using a

master/slave configuration. Several accessory power supplies are available to power the

DX6400 models and reading station components. See par. 1.5.

A security system allows the laser to activate only once the motor has reached the correct

rotational speed; consequently, the laser beam is generated after a slight delay from the

power on of the scanner.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 93 94

Keine Kommentare

Datalogic DX6400 Installationshandbuch Seite 39