Datalogic DX6400 Installationshandbuch PDF herunterladen (Seite 20)

DX6400

2.2 MECHANICAL MOUNTING

2.2.1 Mounting the Scanner

The DX6400 reader can be positioned and installed in the best way possible as a result of

the Step-a-Head™ feature. Thanks to the separation between Head and Base, you can

modify the orientation of the decoder base, and therefore display-keypad and connector

panels, while keeping the optic head in the correct reading position. The reading head and

the decoder base can be rotated independently from each other allowing the installation even

in the most critical locations.

Head Screws

Fixing S

(4)

cre

Figure 2 - Step-A-Head™ Feature

To rotate the head follow the given procedure:

1. detach the head from the base by unscrewing the four fixing screws;

2. rotate the head in the desired position;

3. loosen but don't remove the two screws on top of the head;

4. affix the head onto the base carefully aligning the four fixing screws and progressively

tightening them about half-way;

5. completely tighten the two screws on top of the head;

6. completely tighten the four fixing screws.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 93 94

Keine Kommentare

Datalogic DX6400 Installationshandbuch Seite 20