Datalogic Magellan 3300HSi Bedienerhandbuch PDF herunterladen (Seite 195)

Product Reference Guide

187

Appendix I

Handheld Data Format Requirements

This appendix provides application notes to describe the general format of data that can be accepted by the scanner

through the auxiliary port as transmitted from a handheld scanner.

Handheld Data Format Requirements General

• 9600 bps, 8 data bits, 1 stop bit, no parity.

• RTS is used to "bracket" the data received from the handheld: RTS must be asserted high during data trans-

mission, and de-asserted after label transmission is complete. CTS is used to hold off transmission of label

from handheld.

• Symbologies requiring fixed lengths (UPC/EAN) will enforce length requirements for validation of the label.

• Handheld will be required to transmit start and stop characters for Codabar and Code 39 labels.

• Appropriate industrial length requirements will be enforced (if configured) for validation of the label.

• Maximum label lengths will be enforced for label validation (i.e. labels longer than the maximum label size

will not be validated).

• Standard Datalogic formats generally use a single prefix character. The specific formats are provided below.

• Suggest that handheld turn off audible and visual good read indications to minimize operator confusion.

• Scanner will indicate if a label of improper format has been received from the handheld by sounding a “trill.”

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 207 208

Keine Kommentare

Datalogic Magellan 3300HSi Bedienerhandbuch Seite 195