Datalogic QLM700 Bedienerhandbuch PDF herunterladen (Seite 18)

MATRIX 210™ REFERENCE MANUAL

NOTE

If you have used this procedure to configure Matrix 210™ go to step 7.

RESET READER TO FACTORY DEFAULT (OPTIONAL)

If it ever becomes necessary to reset the reader to the factory default values, you can

perform this procedure by holding the X-PRESS™ push button pressed while powering up

the reader. You must keep the X-PRESS™ push button pressed until the power up

sequence is completed (several seconds) and all LEDs blink simultaneously 3 times.

All LEDs remain on for about 1 second, then off for one second, the Configuration and

Environmental parameters are reset, and the status LED remains on. If connected through a

CBX500 with display module, the message "Default Set" is shown on the display.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 141 142

Keine Kommentare

Datalogic QLM700 Bedienerhandbuch Seite 18