Datalogic QLM700 Installationshandbuch PDF herunterladen (Seite 68)

DS2100N REFERENCE MANUAL

5.2.3 RS485 Half-Duplex Interface

NOTE

This interface is provided for backward compatibility. We recommend using

the more efficient ID-NET™ network for Master/Slave or Multiplexer layouts.

The RS485 half-duplex (3 wires + shield) interface is used for polled communication

protocols.

It can be used for Multidrop connections with a Datalogic Multiplexer, (see par. 6.5) exploiting

a proprietary protocol based on polled mode called MUX32 protocol, where a master device

polls slave devices to collect data.

The connector pinout follows:

25-pin

Name

Function

RTX+

RS485 Receive/Transmit Data +

RTX-

RS485 Receive/Transmit Data -

GND

Ground

RTX+

RTX-

RTX485 +

RTX485 -

GND

MULTIPLEXER

RS485REF

DS2100N

Chassis

Figure 67 - RS485 Half-duplex Connections

This interface is forced by software when the protocol selected is MUX32 protocol.

In a Multiplexer layout, the Multidrop address must also be set via serial channel by the

Genius™ utility or by the Host Programming Mode.

Figure 68 shows a multidrop configuration with DS2100N scanners connected to a

Multiplexer.

CAUTION

This is an example of multidrop wiring. Consult the multiplexer manual for

complete wiring instructions.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 119 120

Keine Kommentare

Datalogic QLM700 Installationshandbuch Seite 68